1) Vertical Fixing Bracket
This brackets GBP 18.00 extra. |
- Fixing to post top / flat walls etc.
- Steel base plate: 10cm x 10cm.
- 8mm diameter fixing points.
- 20mm diameter threaded steel bar, approximately 30cm long complete with locking nut.
- GOOD QUALITY screw bolts required (not supplied).
|
|
 |
2) Vertical Slotted Fixing Bracket
This brackets GBP 25.00 extra. |
- Fixing to roof ridge board.
- Steel slotted base plate: 15cm deep x 4cm wide.
- 4cm wide slot to suit 4cm thick ridge board.
- 13mm diameter fixing points.
- 20mm diameter threaded steel bar, approximately 30cm long complete with locking nut.
- GOOD QUALITY screw bolts required (not supplied).
|
|
 |
3) Vertical Stem Fixing Bracket
This brackets GBP 15.00 extra. |
- For pyramid (clock tower) style roof.
- Steel base plate: 5cm x 5cm.
- 20mm diameter threaded steel bar, approximately 30cm long complete with locking nuts.
- Steel stop collar.
|
|
 |
4) Side Fixing Angle Bracket
This brackets GBP 75.00 extra. |
- For external fixing to gable end.
- Main stem: Manufactured from 40mm x 40mm x 3mm steel box section, 620mm long.
- Feet: Manufactured from 40mm x 10mm flat solid steel.
- Top foot: 150mm long with 13mm diameter holes at 100mm centres.
- Bottom foot: 200mm long with 13mm diameter holes at 150mm centres.
- Legs: 150mm long providing 160mm clearance from wall.
- Centres between legs approximately 300mm.
- Bracket is topped with capping plate and 20mm threaded fixing.
- GOOD QUALITY screw bolts required (not supplied).
|
 |
| 5) Bespoke Brackets |
- These brackets are designed to suit the majority of applications.
- If these are not suitable for you, we will design a bracket to suit.
- Contact us for a quotation.
|
| Please Note: |
- It is important that your weathervane is installed by a competent professional tradesman.
- To ensure that your weathervane operates correctly it should be fixed in a true vertical position.
- When installation is complete offer a few drops of light oil into the top of the centre tube before positioning the ball bearing and the profile stem.
- Marsh Forge Blacksmiths reserves the right to change designs and specifications without prior notification.
|
